DIN 2565 PN6 / DIN 2566 PN16 Flange Threaded
FLANGAIDH SGRÙDAIDH
Meudan Flange & Aifreann tuairmseach
| DIN 2565 PN 6 Sònrachadh Flange Threaded | |||||||||||||
| Rangaichte |
| Flasg | amhaich | Aghaidh àrdaichte | Sgriothan | Cuideam | |||||||
| d1 | Snàthainn | D | b | k | h1 | d3 | d4 | f | Tuill | Snàthainn | d2 | Kg | |
| 15 | 21,3 | R 1/2 | 80 | 12 | 55 | 20 | 30 | 40 | 2 | 4 | M 10 | 11 | 0,373 |
| 20 | 26,9 | R 3/4 | 90 | 14 | 65 | 24 | 40 | 50 | 2 | 4 | M 10 | 11 | 0,59 |
| 25 | 33,7 | R 1 | 100 | 14 | 75 | 24 | 50 | 60 | 2 | 4 | M 10 | 11 | 0,743 |
| 32 | 42,4 | R 1 1/4 | 120 | 14 | 90 | 26 | 60 | 70 | 2 | 4 | M 12 | 14 | 1,05 |
| 40 | 48,3 | R 1 1/2 | 130 | 14 | 100 | 26 | 70 | 80 | 3 | 4 | M 12 | 14 | 1,2 |
| 50 | 60,3 | R 2 | 140 | 14 | 110 | 28 | 80 | 90 | 3 | 4 | M 12 | 14 | 1,37 |
| 65 | 76,1 | R 2 1/2 | 160 | 14 | 130 | 32 | 100 | 110 | 3 | 4 | M 12 | 14 | 1,92 |
| 80 | 88,9 | R 3 | 190 | 16 | 150 | 34 | 110 | 128 | 3 | 4 | M 16 | 18 | 2,82 |
| 100 | 114,3 | R 4 | 210 | 16 | 170 | 38 | 130 | 148 | 3 | 4 | M 16 | 18 | 3,19 |
| 125 | 139,7 | R 5 | 240 | 18 | 200 | 40 | 160 | 178 | 3 | 8 | M 16 | 18 | 4,47 |
| 150 | 165,1 | R 6 | 265 | 18 | 225 | 44 | 185 | 202 | 3 | 8 | M 16 | 18 | 5,3 |
| DIN 2566 PN16 Sònrachadh Flange Threaded | |||||||||||||
| Rangaichte |
| Flasg | amhaich | Aghaidh àrdaichte | Sgriothan | Cuideam | |||||||
| d1 | Snàthainn | D | b | k | h1 | d3 | d4 | f | Tuill | Snàthainn | d2 | Kg | |
| 15 | 21,3 | R 1/2 | 95 | 14 | 65 | 20 | 35 | 45 | 2 | 4 | M 12 | 14 | 0,613 |
| 20 | 26,9 | R 3/4 | 105 | 16 | 75 | 24 | 45 | 58 | 2 | 4 | M 12 | 14 | 0,91 |
| 25 | 33,7 | R 1 | 115 | 16 | 85 | 24 | 52 | 68 | 2 | 4 | M 12 | 14 | 1,1 |
| 32 | 42,4 | R 1 1/4 | 140 | 16 | 100 | 26 | 60 | 78 | 2 | 4 | M 16 | 18 | 1,6 |
| 40 | 48,3 | R 1 1/2 | 150 | 16 | 110 | 26 | 70 | 88 | 3 | 4 | M 16 | 18 | 1,78 |
| 50 | 60,3 | R 2 | 165 | 18 | 125 | 28 | 85 | 102 | 3 | 4 | M 16 | 18 | 2,43 |
| 65 | 76,1 | R 2 1/2 | 185 | 18 | 145 | 32 | 105 | 122 | 3 | 4 | M 16 | 18 | 3,18 |
| 80 | 88,9 | R 3 | 200 | 20 | 160 | 34 | 118 | 138 | 3 | 8 | M 16 | 18 | 4,12 |
| 100 | 114,3 | R 4 | 220 | 20 | 180 | 38 | 140 | 158 | 3 | 8 | M 16 | 18 | 4,47 |
| 125 | 139,7 | R 5 | 250 | 22 | 210 | 40 | 168 | 188 | 3 | 8 | M 16 | 18 | 6,13 |
| 150 | 165,1 | R 6 | 285 | 22 | 240 | 44 | 195 | 212 | 3 | 8 | M 20 | 22 | 7,92 |
NOTA:
1. Aghaidh a rèir DIN 2526
Aghaidh chòmhnard:
Foirm A, Aghaidh gun riatanasan sam bith
Foirm B, Face Rz = 160, innealta (gun a bhith nas socair na 40µm)
Aghaidh àrdaichte:
Foirm C, Face Rz = 160, innealta (gun a bhith nas socair na 40µm)
Foirm D, Aghaidh Rz = 40, inneal
Foirm E, Face Rz = 16, inneal
2. Cànan is claisean a rèir DIN 2512
Foirm F, Tunga
Foirm N, Groove
3. Fireann agus Boireann a rèir DIN 2513, DIN 2514
Foirm V13, V14, Fireann
Foirm R13, R16, Boireann
4. Chemfering airson diaphragm-weld pacaidean, PN64-PN400, a rèir DIN 2695
5. Aghaidh airson joints cumadh lionsa, PN64-PN400, a rèir DIN 2696
Comas Riochdachaidh & Mion-fhiosrachadh Ceannach
1. Meud Flange Solarachaidh DN15 - DN2000 (1/2 ″ - 80 ″), Flange Forged.
2. Stuth Carbon Steel: RST37.2, C22.8, S235JR, ST37, P235GH, P245GH, P250GH, ASTM A105
3. Stuth stàilinn: ASTM A182 F304, F304L, F316, F316L, F321 etc.
4. Flanges Anti Rust: Anti Rust Ola, Peant Dubh, Còmhdach Paint Buidhe, Galvanized Hot Dipped, Galvanized Fuar msaa.
5. Toradh Mìosail: 3000 tunna gach Mìos.
6. Teirmean Lìbhrigeadh: CIF, CFR, FOB, EXW.
7. Teirmean Pàighidh: Gluasad Uèir (T/T), L/C nach gabh ath-ghairm aig Sealladh etc.
8. Meud Òrdugh as ìsle: 1Ton no 100Pcs.
9. Barantas Càileachd: EN10204 3.1 Teisteanas, Teisteanas Muilne, Sgrùdadh Treas Pàrtaidh, Seirbheis Ath-chuir an-asgaidh.
10. Lorg Tuilleadh riatanasan ann Flanges Market.