DIN 2642 PN10 FLANGAIDH
LAOIDH LAOIDH
Meudan Flange & Aifreann tuairmseach
| Flange lapped sa Ghearmailt DIN 2642;cuideam ainmichte 10 | |||||||||||
| Lose Flansche Vorschweißbördel Glatte Bunde DIN 2642 Nendruck 10 | |||||||||||
| Tournantes Brides: ainmear cuideam 10 | |||||||||||
| Pìob | Flasg | Sgriothan | Cuideam | ||||||||
| Rangaichte | d1 | D | d6 | b | k | e | Tuill | Snàthainn | d2 | Kg | |
| ISO | DIN | ||||||||||
| 15 | - | 20 | 95 | 22 | 14 | 65 | 3 | 4 | M 12 | 14 | 0,689 |
| 21,3 | - | 24 | |||||||||
| 20 | - | 25 | 105 | 28 | 14 | 75 | 3 | 4 | M 12 | 14 | 0,806 |
| 26,9 | - | 30 | |||||||||
| 25 | - | 30 | 115 | 33 | 16 | 85 | 4 | 4 | M 12 | 14 | 1,11 |
| 33,7 | - | 36 | |||||||||
| 32 | - | 38 | 140 | 42 | 16 | 100 | 4 | 4 | M 16 | 18 | 1,64 |
| 42,4 | - | 46 | |||||||||
| 40 | - | 44,5 | 150 | 50 | 16 | 110 | 4 | 4 | M 16 | 18 | 1,86 |
| 48,3 | - | 54 | |||||||||
| 50 | - | 57 | 165 | 62 | 16 | 125 | 5 | 4 | M 16 | 18 | 2,20 |
| 60,3 | - | 65 | |||||||||
| 65 | 76,1 | - | 185 | 81 | 16 | 145 | 5 | 4 | M 16 | 18 | 2,62 |
| 80 | 88,9 | - | 200 | 94 | 18 | 160 | 5 | 8 | M 16 | 18 | 3,32 |
| 100 | - | 108 | 220 | 113 | 18 | 180 | 5 | 8 | M 16 | 18 | 3,67 |
| 114,3 | - | 119 | |||||||||
| 125 | - | 133 | 250 | 138 | 18 | 210 | 5 | 8 | M 16 | 18 | 4,54 |
| 139,7 | - | 145 | |||||||||
| 150 | - | 159 | 285 | 164 | 18 | 240 | 5 | 8 | M 20 | 22 | 5,60 |
| 168,3 | - | 173 | |||||||||
| 200 | 219,1 | - | 340 | 225 | 20 | 295 | 5 | 8 | M 20 | 22 | 7,46 |
| 250 | - | 267 | 395 | 273 | 22 | 350 | 5 | 12 | M 20 | 22 | 10,30 |
| 273 | - | 279 | |||||||||
| 300 | 323,9 | - | 445 | 329 | 26 | 400 | 5 | 12 | M 20 | 22 | 14.00 |
| 350 | 355,6 | - | 505 | 362 | 28 | 460 | 6 | 16 | M 20 | 22 | 18,50 |
| - | 368 | 374 | |||||||||
| 400 | 406,4 | - | 565 | 413 | 32 | 515 | 6 | 16 | M 24 | 26 | 25.00 |
| - | 419 | 426 | |||||||||
| (450) | 457 | - | 615 | 467 | 38 | 565 | 6 | 20 | M 24 | 26 | 30,60 |
| 500 | 508 | - | 670 | 517 | 38 | 620 | 6 | 20 | M 24 | 26 | 37.00 |
| 600 | 610 | - | 780 | 618 | 44 | 725 | 7 | 20 | M 27 | 30 | 56,30 |
| 700 | 711 | - | 895 | 721 | 50 | 840 | 7 | 24 | M 27 | 30 | 80,40 |
| 800 | 813 | - | 1015 | 824 | 56 | 950 | 7 | 24 | M 30 | 33 | 113,20 |
NOTA:
1. Aghaidh a rèir DIN 2526
Aghaidh chòmhnard:
Foirm A, Aghaidh gun riatanasan sam bith
Foirm B, Face Rz = 160, innealta (gun a bhith nas socair na 40µm)
Aghaidh àrdaichte:
Foirm C, Face Rz = 160, innealta (gun a bhith nas socair na 40µm)
Foirm D, Aghaidh Rz = 40, inneal
Foirm E, Face Rz = 16, inneal
2. Cànan is claisean a rèir DIN 2512
Foirm F, Tunga
Foirm N, Groove
3. Fireann agus Boireann a rèir DIN 2513, DIN 2514
Foirm V13, V14, Fireann
Foirm R13, R16, Boireann
4. Chemfering airson diaphragm-weld pacaidean, PN64-PN400, a rèir DIN 2695
5. Aghaidh airson joints cumadh lionsa, PN64-PN400, a rèir DIN 2696
Comas Riochdachaidh & Mion-fhiosrachadh Ceannach
1. Meud Flange Solarachaidh DN15 - DN2000 (1/2 ″ - 80 ″), Flange Forged.
2. Stuth Carbon Steel: RST37.2, C22.8, S235JR, ST37, P235GH, P245GH, P250GH, ASTM A105
3. Stuth stàilinn: ASTM A182 F304, F304L, F316, F316L, F321 etc.
4. Flanges Anti Rust: Anti Rust Ola, Peant Dubh, Còmhdach Paint Buidhe, Galvanized Hot Dipped, Galvanized Fuar msaa.
5. Toradh Mìosail: 3000 tunna gach Mìos.
6. Teirmean Lìbhrigeadh: CIF, CFR, FOB, EXW.
7. Teirmean Pàighidh: Gluasad Uèir (T/T), L/C nach gabh ath-ghairm aig Sealladh etc.
8. Meud Òrdugh as ìsle: 1Ton no 100Pcs.
9. Barantas Càileachd: EN10204 3.1 Teisteanas, Teisteanas Muilne, Sgrùdadh Treas Pàrtaidh, Seirbheis Ath-chuir an-asgaidh.
10. Lorg Tuilleadh riatanasan ann Flanges Market.